News

City & Guilds have been awarded, in partnership with EAL, the authority to be the delivery partner for the Institute for Apprenticeships and Technical Education and develop the new T-level Technical Qualifications in Engineering and Manufacturing. The development of these new Technical Qualifications is currently underway, with the first teaching of these qualifications set to take place from September 2022.

The three Technical Qualifications they are developing include:

City & Guilds and EAL are currently looking for employers to review the developed content and ensure that it is fit for purpose, equipping learners with all of the skills and knowledge they will require to be a valuable member of your workforce.

What are T-Levels?

T-levels are new courses which follow on from GCSEs and are equivalent to 3 A-levels. They are two-year courses, which were first launched in September 2020, and have been developed in collaboration with employers and providers to ensure their content meets the needs of industry and prepares learners for work, further training, or further study.

They provide learners with a combination of both classroom learning and ‘on-the-job’ experience during an industry placement of at least 315 hours (which equates to approximately 45 days). T-level courses are also based on the same standards as apprenticeships and are therefore approved by the Institute for Apprenticeships and Technical Education and Ofqual.

Further information...

Employer Involvement

In preparation for the delivery of the new T-levels to begin in September 2022, City & Guilds and EAL are collaborating with employers to develop the qualifications and are looking for your input. There is an opportunity to get involved in two areas, including:

Get Involved

City & Guilds and EAL are hosting a webinar titled ‘T-Levels - Engineering New Employer Event’ on Thursday 24 June 2020 9:30 am (BST), which will provide an introduction to T-levels aimed at employers.

Full event and registration details 

The Welding Institute hosted a successful Continuing Professional Development (CPD) webinar last week, reaching a global audience of professionals looking to further their knowledge and understanding of the importance of CPD.

Event Overview

The informative webinar, which was led by our Membership Team and guest speaker Martin Boyd (Acting Vice-Chair of Membership Committee and Vice-Chair for East Midlands Branch), covered a range of topics including:

Speaking on the event, our Membership and Registration Team Manager, Lotte Quivst-Larkins, said:

“The Membership Team would like to thank everyone who joined our CPD webinar on Wednesday 12 May as well as thank our guest speaker, Martin Boyd, for this great contribution to the event. CPD is a major element of Institute membership and we do hope that our attendees went away with an improved understanding of the importance of planning and recording their CPD as well as some ideas on how to go about doing this. Hopefully, some of our Members' questions about being picked for a CPD audit will also have been addressed. The Membership Team is always available for further guidance on this, so please feel free to contact us at any time.”

Our Members can now find the webinar recording on our Members Portal here.

Not a Member?

Join The Welding Institute today and become part of a network of likeminded individuals. Find out more about Membership and how you can join here.

The Welding Institute and The Institute for Apprenticeships and Technical Education are working together to encourage employers to help shape the future training of welding apprentices by joining the employer ‘trailblazer’ group that will be responsible for reviewing the level 2 general welder apprenticeship.

As the leading professional engineering institution for the registration of welding and joining personnel, The Welding Institute advocates the need for employer support while developing the future training of welding apprentices.

With a high demand for this employer support across industry, our Professional Membership and Accreditation Manager, Lois Appleyard has offered the following statement:

“It’s vital that we ensure this apprenticeship continues to meet all the latest skills needs and regulations. As a trailblazer, you can play an important role with helping apprentices get the most from their training and supporting them onto long and successful careers.”

Deputy Director for the Institute for Apprenticeships and Technical Education, Jonathan Mitchell, also explained:

“General welding is highly valued right across industry. It’s so important that apprentices learn all the right knowledge, skills and behaviours and we rely on our trailblazer employers to tell us what they should be. This is a wonderful opportunity to help shape future training.”

To find out more about the type of employers we need and the requirements expected through the process, check out The Institute for Apprenticeships and Technical Education press release and the FE News - Further Education College & Training Provider News Channel website.

The Welding Institute would like to take this opportunity to congratulate Matt Haslett on recently being awarded Fellow status of The Welding Institute.

Matt (FWeldI CEng) has been a Member of The Welding Institute since 2012 and has been closely involved with many aspects of the Institute and our Members, including seven years volunteering as the chair of our Younger Members’ Committee (YMC).

We interviewed Matt about his achievement and also took the opportunity to find out a bit more about his career and experience within the engineering industry.

Educational Background:

Matt studied Mechanical Engineering at the University of Cambridge (Churchill College) from 2004 to 2008 and is currently studying part-time for an Executive MBA as an advanced apprentice with De Montfort University, Leicester.

Career Background:

“Before I went to university I worked for a year as a nuclear engineer. My first job after university was as a marine engineering officer in the Royal Navy before working as an operational analyst for the MOD. I moved back into engineering when I joined TWI in 2012. My current role is as a Principal Project Leader, working on and managing various project for our clients. My main areas of expertise include fracture mechanics, mechanical testing (small-scale, full-scale and bespoke) and engineering critical assessment. I also organise and lecture on some of TWI’s training courses (welding diploma and structural integrity assessment) and am heavily involved in educational outreach for TWI and The Welding Institute.”

Why did you choose a career in engineering?

“My dad was a mechanical engineer and I also got involved in a young engineers’ club at school. I enjoy problem solving and variety in my work, and engineering gives me both of these.”

Matts’ experience as Chair of the Younger Members’ Committee

As already highlighted, Matt chaired the Younger Members’ Committee for 7 years and he explained a bit about what this involved, including his reasons and ambitions behind taking on the role.

Why did you initially choose to undertake the role of Chair?

“I have a passion for education outreach. These types of activities got me interested in engineering while I was at school and I wanted to continue to promote STEM subjects in schools and ‘give something back.’ The YMC chair role was the ideal opportunity to push this agenda.”

What were your main responsibilities and roles as Chair?

“Chairing committee meetings, supporting junior members to advance their careers and promoting welding and joining technologies through education outreach.”

What were your goals when you initially chaired the YMC and did they change over your time as Chair?

“With my passion for education outreach, running events for schools was my main driver during my seven years as chair. However, I was able to get people from lots of different backgrounds involved in the committee, to help improve what we could offer.”

What changes within the industry as a whole, and more specifically, within the Institute itself would you say that you’ve seen for Younger Engineers within the time you undertook the role to now?

“I think working towards professional registration has become more recognised by younger engineers, which is great. Being adaptable to a situation is certainly now an essential part of being a good professional engineer, especially in the current times we find ourselves due to COVID-19.”

About Matt’s time as a Member with The Welding Institute

Why did you initially join The Welding Institute?

“I was already following a professional engineering route based on my mechanical engineering degree and joining The Welding Institute was ideal when I joined TWI and started to work in the field of welding, joining and associated technologies. To achieve Fellow status recently was a great honour and I hope I can continue to support the Institute in as many ways as possible.”

What roles do you currently undertake with the Institute?

“I am still part of the YMC, even though I am no longer the Chair. I also conduct professional review interviews and mentor junior engineers at TWI who are working towards professional registration.”

Why did you choose to become professionally registered with the Engineering Council?

“For me, CEng shows that you have been practising as a competent engineer, rather than just having a qualification. It holds a lot of weight as it is peer reviewed and I have often found that the best engineers I have worked with over the years have also been professionally registered.”

What advice would you give to someone who is considering professional membership or registration?

“Start early! Learn more about the competences required and start collecting evidence towards them. It will make it a lot easier to prepare your application when the time is right!”

The Welding Institute would like to congratulate Matt on his well-deserved Fellow status and would also like to thank him for all of the work that he has and continues to do with our Members!

Related Content:

Younger Members Committee – New Chair Elect, Catherine Leahy AWeldI

A new statement has recently been released by the International Institute of Welding (IIW) regarding lung cancer and arc welding.

The statement was produced by the IIW Commission VIII, ‘Health, Safety and Environment,’ which is chaired by TWI Technology Manager and Member of The Welding Institute, Eur Ing Geoff Melton (SenMWeldI CEng). Commission VIII studies occurrences during the welding process that can potentially affect health, safety and the environment, and additionally looks at the development of technical guidance for correct management of the fabrication process in industry. Commission VIII acts as the global interdisciplinary forum for exchange of knowledge in the industry, supported by the expertise of its members who represent different scientific disciplines including Medicine, Chemistry, Occupation Hygiene and Welding Engineering.

The IIW is the world’s largest network and centre of reference for welding and allied joining technologies. Its mission is, ‘to act as the worldwide network for knowledge exchange of joining technologies to improve the global quality of life.’ The IIW’s mission also involves operating as the global body for the science and application of joining technology by providing a forum for networking and knowledge exchange among scientists, researchers and industry. Read more...

The International Agency for Research on Cancer (IARC) published Monograph 118, in 2018 where it outlined that welding fumes were evaluated and reclassified as Group 1 (carcinogenic to humans). Prior to this assessment, an IARC evaluation from 1990 classified welding fumes as ‘possibly carcinogenic’ to humans (Group 2B). The 2018 reclassification was therefore based on the epidemiological excess risk for lung cancer and the suppressive effect on the immune system caused by welding fumes.

Read the full IIW statement of lung cancer and welding below:

LUNG CANCER AND ARC WELDING OF STEELS

Assessment of the International Agency for Research on Cancer (IARC)

Monograph 118, 2018

In 2018, IARC published Monograph 118, in which welding fumes were evaluated, and has reclassified them as Group 1 (carcinogenic to humans). Based on this assessment, IARC revised its evaluation from 1990, when it classified welding fumes as “possibly carcinogenic” to humans (group 2B).

This assessment was based on an epidemiological excess risk for lung cancer and was supported by publications on local and systemic inflammatory processes and a suppressive effect on the immune system caused by welding fumes.

Background:

In 2003, IIW Commission VIII issued a statement on the excess risk of lung cancer in electric arc welders. In 2011, this statement was reconfirmed (Ref. Welding in the World, 55, 12-20, 2011).

IIW recommended that to eliminate the excess risk of lung cancer, welders and their managers must ensure that:

Since 2011, more human studies have been published. On the balance of evidence, the grade of risk excess has been confirmed. This assessment has been corroborated also in a meta-analysis published subsequently after the IARC monograph 118 (Honaryar et al. 2019). Again, the excess risk has been shown irrespective of the type of steel (mild steel or stainless steel) welded.

In addition to lung cancer, IARC stated that there is also an excess risk for kidney cell cancer, as shown in several epidemiological studies. The evidence was rated “limited” due to the fact that any confounding effect of solvents could not be ruled out.

IARC also classified ultraviolet radiation from arc welding as carcinogenic (sufficient evidence, group 1), based on an excess risk of uveal melanoma of welders found in some epidemiological studies.

Therefore, based on the current state of knowledge, IIW confirms its statement from 2011 and encourages all those responsible to reduce the exposure to welding fume to a minimum.

IIW recommends that to eliminate the excess risk of lung cancer, welders and their managers must ensure that exposure to welding fume is minimized, at least to national guidelines.

Our first Structural Integrity Technical Group Meeting of this year will be looking at 'Latest Developments in Fitness for Service Procedures in BS7910, R6 and ASME/API579,' and will be hosted online on the 15 April.

This online afternoon event will look into the application of fitness-for-service procedures within multiple industries, globally, being dominated by three key codes and standards:

• BS7910
• R6
• ASME/ API579

Each of these codes/standards have recently or are currently in the process of being revised and The Welding Institute’s Structural Integrity Technical Group has organised for experts with detailed experience and knowledge of the developments of each of these codes/standards to deliver presentations at this technical event, highlighting the most significant changes. Our speakers are highly experienced engineers who chair or are Members of one or more of the committees overlooking the development of these codes/standards.

Outline of presentations and speakers:

The R6 Assessment Procedure: Recent Developments in Revision 4 Amendment 12 and Beyond - Cory Hamelin, Materials Engineer at EDF Energy

BS 7910:2019 - What's New? – Isabel Hadley, Technology Fellow at TWI Ltd

Transporting Carbon Dioxide / Hydrogen in Pipelines. What are the Implications for Structural Integrity? – Andrew Cosham, CEO of Ninth Planet Engineering Limited

Recent Developments in Fracture Mechanics Aimed at Reducing Conservatisms in Defect Assessment Methodologies – John Sharples, Senior Consultant in Materials Science and Structural Integrity at Jacobs

ASME/ API579: 2021 and Beyond - Benjamin Hantz, ASME Fellow Technology Advisor Mechanical Reliability at Valero

Group Discussion and Q&A – all speakers

Find out more and register here!

More about the speakers...

This event is run jointly with FESI

FESI provides a forum for the development and enhancement of best practice for engineering structural integrity practitioners, for academics and across all industry sectors in the UK and overseas. 

The Welding Institute’s Joining Processes Technical Group successfully hosted its first Technical Group Meeting online this week, with the overall event looking at ‘Welding and Repair of High Temperature Plant.’ The online event was hosted over one morning with guest speakers from industry delivering in-depth presentations to a global audience, including from France, Sweden, Australia, Malaysia, South Africa and Norway, to name a few!

Overview of the event:

About the Speakers and the Event:

Professor Scott Lockyer

Technical Head, Materials and Corrosion - Uniper Technologies Limited

Professor Scott Lockyer is Technical Head of Materials and Corrosion at Uniper Technologies Limited’s (UTG) Integrity and Inspection Solutions department. Scott’s role involves providing technical leadership and oversight of materials activities such as R&D, failure investigation and component life assessment. Scott joined UTG in 2005 following technical management and principal engineer roles in a number of engineering consultancies, including TWI Ltd. Prior to this, Scott was a Research Fellow in the Department of Materials at Oxford University. Scott holds a degree in Metallurgy and Materials Science and a PhD in Metallurgy from the University of Liverpool. He was also appointed Royal Academy of Engineering Visiting Professor in Advanced Materials at Loughborough University from 2013-2017 and has subsequently continued in this post.

Scott’s presentation was titled, ‘Welding and Repair of High Temperature Plant,’ which looked into multiple case studies, including IBN1 (MarBN) steel and IBN1 (MarBN) steel matching consumable, steam conditioning valve, high pressure steam pipework, high pressure steam chest (turbine valve) drain, grade 91 outlet manifold branches and T24 membrane wall tubes. This was followed by conclusions, which looked into the repair options for high temperature plant and additionally the conditions under which all repairs should be subject.

Neil Bennett (SenMWeldI CEng)

Head of Welding Engineering - Doosan Babcock

With over 35 years’ experience in welding and welding engineering and over 20 years of this time being spent on power generation plant, Neil is currently Head of Welding Engineering, Responsible Welding Coordinator (in accordance with ISO 3834-2) and Global Construction Welding Technical Authority at Doosan Babcock. He provides governance to both UK and overseas based operational sites in power generation, petrochemical, nuclear and process sectors. Neil is also engaged in developing novel solutions to repair of ageing plant, especially nuclear and process/gas plant, additionally providing support in the construction of the new nuclear power plant at Hinkley Point.

Neil’s presentation looked at the, ‘Replacement of Spun Cast Ni/Cr Alloy Pipework in Process Gas Heaters.’ The presentation began with an introduction into process gas heaters, continuing on to look at the reasons for the use of spun cast alloys, and the reasons for replacement and potential problems faced, followed by an exploration of possible solutions and concluding with a final look at the outcomes and conclusions and a look into the future of work within this area.

Marcello Consonni (FWeldI CEng)

Principal Project Leader – Arcs Welding - TWI

Marcello joined TWI in 2006, working in the Fracture Integrity and Arc Welding sections, after a four-year experience as a metallurgist/welding engineer with a pressure vessel manufacturer. Marcello holds a MEng in Materials Engineering from Politecnico in Milan. He specialises in welding engineering consultancy, support with the application of welding codes and standards and welding of high-temperature materials. He has published over ten peer-reviewed publications and conference papers and actively participates in many national and international codes and standards committees, including those covering the ISO 15614 and ISO 9606 series, ASME BPVC Section and Afcen committees.

Marcello’s presentation looked at, ‘Recent and Upcoming Code Changes,’ where he looked into P/T91/92 OR ASME ISO specifications.

Michael Skyrme (FWeldI CEng)

Welding Engineering Manager - BAE Systems - Maritime Submarines

Mike is currently the Welding Engineering Manager for BAE Systems - Maritime Submarines, based at Barrow-in-Furness and leads a team of professional welding engineers and technicians supporting the design, construction and commissioning of nuclear powered submarines for the Royal Navy.

He was elected Chair of a new Trailblazer Employer Group established in 2014 and, to date, has led the group, consisting of employers representing both large and small/medium sized companies, training providers, end point assessment organisations and professional institutions, through successful submission and approval of new "employer led" apprenticeship standards for the welding industry in England.

Mike has also recently joined The Welding Institute Governing Council (read more).

Mike (FWeldI CEng) delivered a presentation which looked into, ‘Trailblazers’ and the ‘apprentice standards for welding.’ His talk covered a background into apprenticeships in relation to the Richard Review 2012 and an explanation of trailblazer apprenticeships, overview of new standards, reasons for and options in relation to apprenticeships, including an insight into funding, the apprenticeship levy and concluded with an overview of apprenticeship standards available to suit your current requirements.

Gene Mathers (FWeldI CEng)

Joining Processes Technical Group Chair and Fellow of The Welding Institute, Gene Mathers (FWeldI CEng) has extensive experience within this field of engineering, demonstrated by over 40 years of experience within industry working in power generation, pipeline, heavy engineering, heavy engineering, nuclear and the pressure vessel fabrication industries. Previous to his current role, Gene worked for NEI-International Combustion Ltd as the company’s Welding and Metallurgy Manager for 7 years, after which he continued on to work as a Quality Manager for 3 years at NEI-International Combustion Ltd, before joining TWI Ltd in 1991 as Manager, School of Welding Technology for 3 years, then continuing on to undertake the position of TWI’s Principal Consultant for 13 years.

Gene’s talk looked at, ‘Electro-Slag Cladding – A Case Study,’ and was a case study-based presentation looking at the of application of electro-slag cladding to an industry project with the talk additionally including an outline of electro-slag welding.

The Welding Institute would like to thank all those who attended our first online Joining Processes Technical Group Meeting and our amazing speakers who delivered in-depth technical presentations drawing from their extensive industry experience!

Jazeel Chukkan (MWeldI CEng), Welding Institute Member and TWI Structural Integrity Engineer and Fatigue Integrity Management (FIM) Project Leader, recently achieved his Chartered Engineer status with the Engineering Council and Welding Institute, therefore advancing to MWeldI status with the Institute.

Joining The Welding Institute in 2016 as an Associate Interim Chartered Engineer (AWeldI Interim, CEng) Jazeel achieved his Member (MWeldI) and Chartered Engineer (CEng) status earlier this week.

Jazeel joined TWI in 2018, working within the FIM section. Prior to his time with TWI, he completed his Bachelor’s degree in Mechanical Engineering and a Master’s degree in Welding Engineering. Jazeel is also a former TWI Innovation Network NSIRC student and completed his PhD on the effects of cyclic load on residual stress redistribution in welded structures with Coventry University and TWI in 2019.

Speaking on his recent achievement with The Welding Institute about the reasons why he chose to gain Professional Membership and Registration, Jazeel explained:

“I knew I possessed the competence and commitment to the professional standard set by the Engineering Council and I wanted to demonstrate this to my employer and clients. Also, I believe Chartered status can benefit my career progression. These motivated me to become professionally registered as a Chartered Engineer."

“I have been working in the field of welding and joining for the last 7 years. From my past experience I am well aware that The welding Institute is the leading welding and joining institution that offers professional registration. Various events hosted by The Welding Institute, such as webinars, technical talks and volunteer activities in the field of welding and joining, impressed me and pushed me to choose to gain professional registration with The Welding Institute.”

You can find out more about Jazeel and his achievement in TWI’s recent press release here.

Considering Professional Registration?

Find out more about how you can become professionally registered with The Welding Institute.

As many of you will be aware, our Joining Processes Technical Group Meeting, scheduled for March last year, had to be cancelled due to Covid-19. We know how much those who registered for the meeting were disappointed that it could not go ahead and, therefore, we are running this Technical Group event online with the same amazing speakers and updated presentations.

We have a range of industry leading speakers lined up to deliver the presentations for the event, including; Welding and Joining Processes Technical Group Chair Gene Mathers; Director at Mark Golding Consultants Ltd, Mark Golding; Technical Head of Materials and Corrosion at Uniper, Scott Lockyer; Welding Engineering Manager at BAE Systems and Fellow of The Welding Institute, Michael Skyrme; and TWI Principal Project Leader Marcello Consonni.

What is this online event about?

This Joining Processes Technical Group webinar will look at the major objective within the process plant and power generation industries of reducing life costs. One method of achieving this life extension is through both repair and replacement as well as the use of materials with enhanced performance. This online webinar will consider some of these methods and their role in achieving the above industrial objective.

Topics:

The event will focus on the welding and repair of high temperature steels, especially within the context of the following topics:

These presentations will be delivered by a range of speakers from both industry and TWI and there will also be opportunities for discussions and Q&As of the topics presented.

Registration Fees:

The registration fee for non-members for this online Technical Group event also includes a full and discounted Associate Membership (AWeldI) of The Welding Institute for a year.

Why join The Welding Institute as a Member?

• Professional Membership of The Welding Institute offers professional industrial recognition
• This is a discounted Associate Membership price, available only through registration of this event as a non-member

Join as a Professional Member by registering as a non-member now and begin benefiting from the professional status you can gain!

Benefits of attending:

What type of audience should attend?

Register Here

BAE Systems Maritime Submarines Welding Manager and Fellow of The Welding Institute, Mike Skyrme has recently been elected to the governing council of The Welding Institute.

Coming up to his 22 years of membership with The Welding Institute in February, we are delighted to announce Mike’s recent appointment to the Institute’s governing council. As a Member of The Welding Institute’s Professional Board, Mike was elected, along with other nominees of Professional Board, to represent over 5000 Professional Members on Council. Council provides the overall governance and sets the strategic direction for The Welding Institute and TWI Ltd. The Professional Board oversees the delivery and management of the Institute’s services and benefits for individual professional Members, including professional registration with the Engineering Council.

BAE Systems Submarines released a statement where Mike reflected on this election saying, ‘I’m extremely proud having come from the grassroots. After joining the Institute as a Technician Member in 1999, I became a fellow of the Institute this summer. Now elected to serve on council, I’ll be helping provide the governance for how The Welding Institute and its subsidiaries operate.’

They continued with a statement from BAE Systems Submarines Engineering Director Russ Watson, who said, ‘This is a tremendous accolade for Mike and deserved personal recognition for his technical excellence. It also once again demonstrates the depth and breadth of the expertise in the business.’

Mike joined The Welding Institute as a Technician Member (TechWeldI) in 1999 and has since progressed to fellowship status during his time with us, an accolade that reflects the work, volunteering and support that Mike has provided to The Welding Institute and our Members over the past 21 years. This includes presenting at Branch and Technical Group Events, chairing our Welding Trailblazer scheme since 2014, and helping to develop and embed new, high quality standards for welding apprentices, to a name a few examples. In 2018, Mike was also the first winner of The Welding Institute’s Award for Continuous Development and Learning.

Mike’s progress from starting his career as an apprentice and joining The Welding Institute as a Technician Member (TechWeldI) in 1999, to being awarded Fellowship status in the summer of 2020 and now being elected to the governing council this year, serves as an excellent and inspiring example to all of our Members and the next generation of engineers.

Find out more about how The Welding Institute can support you with your career development!